42 DNX7200
TV Watching
Functions During TV Screen
Basic functions are available even when the TV
screen is displayed.
Display the TV screen
NAV
Mode: Full
2ch
AV-IN
AV-OUT:
IN
AUTO1
AUTO1
AF
TV TV1
TV TV1
2ch
Preset 3
1 3
5 4
7
6
2
1 TV Band Number Display
2 Memory Number Display
3 Channel Number Display
4 Channel Up Area
Increases the channel.
5 Channel Down Area
Decreases the channel.
6 Band Switch Area
Switches to TV1 or TV2.
7 Information Display Button Area
⁄
• For TV picture selection and receiver button operations,
see <Basic operations> (page 12).
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
Various control screens appear in the TV Source mode. (You can only operate TV with the optional
accessory TV Tuner connected.)
Functions when Displaying the Easy
Control Panel
Displays a floating control panel in the screen.
Mode: Full
2ch
AV-IN
AV-OUT:
IN
AUTO1
AUTO1
AF
TV TV1
TV TV1
2ch
Preset 3
NAV
Mode: Full
2ch
AV- INAV-OUT:
IN
AUTO1
AUTO1
AF
SRC
Band SEEK
SCRN
EXT SW
TV TV1
TV TV1
2ch
1 2 3 3 4
5
6
1 Switches the source.
2 Switches the TV band (to TV1 or TV2).
3 Selects a channel.
Use the <Seek Mode> (page 43) to change
the channel tuning sequence.
4 Switches the Seek mode.
(page 43 for the <Seek Mode>)
5 Displays the Screen Control screen.
(page 56 for the <Screen Control>)
6 Displays the external device control screen.
See <External Device Power Supply
Control> (page 53).
⁄
• The Easy Control Panel display is hidden when you touch
a central area of the monitor.