Filter
Top Products
8
3. After a few seconds the cell phone will display “Midland
BT2”. Select it and follow the instructions provided in your
cell phone manual to accept the pairing. When prompted,
enter the pairing code, which is 0000 (four zeroes). Your
cell phone should then display a confirmation message if
the pairing operation has been successfully completed (In
case of error message, complete anyway the procedure,
exit the “setup” mode and try to use the BT2 with your pho
-
ne).
4 The BT2 unit returns to the Setup mode (red indicator per
-
manently on) to indicate that it is ready to be paired with
other devices
If you pair the BT2 unit with a cell phone, you will not be able
to pair it with a GPS Sat-Nav, because both these devices are
assigned (high) priority 1.
This problem can be easily solved by pairing your cell phone
directly with your GPS Sat-Nav and then pairing the GPS with
your Midland BT2 using the above procedure. In this case, the
cell phone features will be managed by the GPS Sat-Nav.
Pairing the unit with a GPS Sat-Nav
It is generally possible to pair the BT2 unit with all GPS Sat-
Navs that support Bluetooth earpieces.
Midland BT2 has been successfully tested for use with GPS
ZUMO Sat-Navs manufactured by Garmin and TOMTOM Ri
-
der 1 and 2 Sat-Navs.
1. On your GPS Sat-Nav, enable the Bluetooth earphone
search feature. As this procedure varies according to the
brand and model of GPS, we recommend you refer to the
manual supplied with your GPS Sat-Nav for further infor
-
mation.
2. Ensure that the BT2 is in Setup mode (Red light on) &
Press the “Phone” button on the BT2 unit until the red and
blue indicators start to flash.
3. After a few seconds the GPS Sat-Nav will display “Midland
BT2”. Select it and follow the instructions provided in the
GPS Sat-Nav manual to accept the pairing. When promp
-
ted, enter the pairing code, which is 0000 (four zeroes).
The GPS should then display a confirmation message if
the pairing operation has been successfully completed.
4. The BT2 unit returns to the Setup mode (red indicator per
-
manently on) to indicate that it is ready to be paired with
other devices.
If you pair the BT2 unit with a GPS Sat-Nav, you will not be
able to pair it with a mobile phone, because both these devi
-
ces are assigned (high) priority 1.
This problem can be easily solved by pairing the cell phone
directly with the GPS Sat-Nav and by then pairing your GPS
with the Midland BT2. In this case, the cell phone features will
be managed by the GPS Sat-Nav.
Pairing the unit with a Bluetooth Enabled MP3
player
NB: Not all MP3 players are “Bluetooth Enabled” Please
check your MP3 players specification before attempting
to connect to the BT2 via Bluetooth.
1. On you MP3 player enable the Bluetooth device search
feature. As the procedure varies according to the brand
and model, refer to the manual supplied with your MP3
player for further information.
2. Ensure that the BT2 is still in Setup mode (Red light on)
Press the “AUX” button on the BT2 unit until the red and
blue indicators start to flash.
3. After a few seconds the MP3 player should display “Mid
-
land BT2”. Select it and follow the instructions provided in
the MP3 Player manual to accept the pairing. If requested,
enter the pairing code, which is 0000 (four zeroes). The
MP3 player should then display a confirmation message
the pairing operation has been successfully completed.
4. The BT2 unit returns to the Setup mode (red indicator per
-
manently on) to indicate that it is ready to be paired with
other devices.
Pairing the unit with other Bluetooth devices
The Midland BT2 can also be paired with other Bluetooth de-
vices such as non-Bluetooth enabled products connected to
Bluetooth adapters (for example any personal audio product
unit connected to a BPA100) or Two Way Radio transceivers
with built-in Bluetooth connections.
1. Enable the pairing mode on the Bluetooth device. As the
procedure varies according to the brand and mode, refer
to the manual supplied with the Bluetooth device for further
information.
2. Ensure that the BT2 is in Setup mode (Red light on) press
“AUX” button on the BT2 unit until the red and blue indica
-
tors start to flash.
3. The pairing will be completed in a few seconds and the
BT2 unit then returns to the Setup mode (red indicator per
-
manently on) to indicate that it is ready to be paired with
other devices.