Mercury 2007s Automobile User Manual


 
Dual Zone Automatic Temperature Control with heated seats
(if equipped)
1.
Defrost: Distributes outside air through the windshield defroster
and demister vents. Can be used to clear thin ice or fog from the
windshield. To exit
select another mode.
2. Passenger temperature control: Press to increase/decrease the
airflow temperature for the passenger in the front of the vehicle.
3.
R
Rear defroster: Press to activate/deactivate rear window
defroster. Refer to Rear window defroster in this section for more
information.
4. DUAL (Dual temperature control): Press to engage/disengage
separate passenger side temperature control.
5.
Passenger heated seat control: Press once to activate high heat
setting (2 indicator lights), press again to activate low heat setting (1
indicator light), and press again to deactivate the passenger heated seat.
Note: The heated seat feature will remain on for approximately ten
minutes.
6.
Recirculated air: Press to activate/deactivate air recirculation
in the cabin. Recirculated air may reduce the amount of time to cool
down the interior of the vehicle and may also help reduce undesired
odors from reaching the interior of the vehicle. Recirculation can be
engaged manually in any other airflow selection except defrost.
Recirculation may turn off automatically in all airflow selections.
2007 Montego (mgo)
Owners Guide (post-2002-fmt)
USA (fus)
Climate Controls
48