Mercedes-Benz MERCEDIES-BENZ Automobile User Manual


 
40
F Memory button
G Position buttons
Storing seat/head restraint/ steering
wheel/exterior and inside rear view
mirror positions in memory:
Three sets of seat/head restraint/
steering wheel/exterior and inside rear
view mirror positions may be
programmed into memory. After the
seat/head restraint/steering wheel/
exterior and inside rear view mirrors
are positioned, push memory button F,
release, and within 3 seconds push
position button "1". A second and third
set of positions for the same seat/ head
restraint/steering wheel/ exterior and
inside rear view mirrors can be
programmed into memory by pushing
first button "F" and then "2",
respectively "3".
Note:
See Index for instructions on adjustment
of steering wheel and mirrors.
Recalling seat/head restraint/ steering
wheel/exterior and inside rear view
mirror positions stored in memory:
To recall a seat/head restraint/ steering
wheel/exterior and inside rear view
mirror position, push and hold position
button "1", "2" or "3" until seat/head
restraint/ steering wheel/exterior and
inside rear view mirror movement has
stopped. The seat/head restraint/
steering wheel/exterior and inside rear
view mirror movement stops when the
position button is released.
Caution!
Do not remove head restraints except
when mounting seat covers. For
removal and installation refer to Head
Restraints, Removal in Index.
Whenever restraints have been
removed be sure to reinstall them
before driving.