Mercedes-Benz MERCEDIES-BENZ Automobile User Manual


 
108
Vehicle Jack
1 Jack arm
2 Jack base
See illustration for proper storage of
jack.
Before storing the jack on the felt in
the spare wheel well, the jack arm
must be lowered almost to the base of
the jack.
Warning!
The jack is designed exclusively for
jacking up the vehicle at the jack
tubes built into either side of the
vehicle. Use the jack only to lift the
vehicle during a wheel change. Never
get beneath the vehicle while it is
supported by the jack. Keep hands
and feet away from the area under
the lifted vehicle. Always firmly set
parking brake and block wheels
before raising vehicle with jack.
Do not disengage parking brake
while the vehicle is raised. Be certain
that the jack is always vertical when
in use, especially on hills. Always try
to use the jack on level surface. Be
sure that the jack arm is fully
inserted in the jack tube. Always
lower the vehicle onto sufficient
capacity jackstands before working
under the vehicle.
Vehicle Tools, Storage
Compartment below Tool Box
1 Lock tool box lid
2 Unlock tool box lid
To open the storage compartment:
Lift out tool box.
To insert the tool box:
Position rear end of tool box, press
down its front end.