Filter
Top Products
i
The seats in the 2nd row of seats must be
in the rearmost position (Y page 103).
X
Fold backrest = forwards into a horizontal
position.
Resetting the seats to the driving
position
G
Warning!
Make sure
R
the seats are properly locked
R
the seat backrests are in an upright position
and are properly locked
An outboard second-row seat is properly
locked only when lock status indicator : is
in hinged position and red marking ; is
barely visible, see "Lock status indicators
(outboard second-row seats)".
If a seat and seat backrest are not properly
locked, the seat could move forward and the
seat backrest could fold. You could slide
under the seat belt during braking, vehicle
maneuvers, or in an accident. If you slide
under it, the belt would apply force at the
abdomen or neck. That could cause serious
or even fatal injuries.
!
Make absolutely sure that you reset the
seats to the driving position in the specified
order:
R
reset the seats in the 3rd row of seats
R
reset the outer seats in the 2nd row of
seats
R
reset the center seat in the 2nd row of
seats (7-seat vehicles)
Resetting the seats in the 3rd row of seats
!
Do not fold down the seat cushions before
moving the backrests into the upright
position. The seat cover could otherwise be
damaged.
X
Grip loop = and pull seat backrest ; into
an upright position.
X
Pull release handle ? and move
backrest ; to the desired position.
X
Place seat cushion : in a vertical position.
X
Fold seat cushion : towards backrest ;
until it engages audibly.
Resetting the outer seats in the 2nd row
of seats
X
Pull release lever ; upwards beyond the
pressure point to the stop and fold
backrest : upwards by about 45 ˚.
X
Insert the head restraint (Y page 102).
X
Pull release lever ; to the pressure point
and adjust backrest : to the desired
position.
254
Stowage areas
Loading, stowing and features
BA 251 USA, CA Edition A 2011; 1; 3, en-US
d2sboike Version: 3.0.3.5
2010-04-16T14:31:55+02:00 - Seite 254