Filter
Top Products
Route guidance inactive
The direction of travel appears in the
multifunction display. If the name of the
street is part of the navigation system data,
this will also be displayed.
Route guidance active
The multifunction display shows navigation
instructions, for example:
Off-road menu
Depending on your vehicle's optional
equipment, you can set the following current
settings to be shown in the Off-road menu:
R
level control (Y page 181)
R
compass (Y page 279)
R
differential locks (Y page 196)
i
Large buildings, power cables or powerful
transmission masts as well as metallic
objects on or in the vehicle may interfere
with the compass display.
X
Press V or U on the steering wheel
to select the Offroad menu.
Example display for vehicles with the Off-Road Pro
engineering package
Settings menu
Introduction
The Settings menu allows you to:
R
Restoring the factory settings
R
Changing the instrument cluster settings
R
Changing the time/date settings
32
R
Changing the lighting settings
R
Changing the vehicle settings
R
Changing the convenience settings
Resetting to factory settings
For safety reasons, the Daytime Running
Lamps function in the Lighting submenu is
only reset if the vehicle is stationary.
X
Press V or U on the steering wheel
to select the Settings menu.
X
Press and hold the . reset button on the
instrument cluster for approximately three
seconds.
A prompt appears in the multifunction
display asking you to confirm by pressing
the . reset button again.
32
This function is not available in vehicles with the navigation module.
Menus and submenus
213
On-board computer and displays
BA 164.1 USA, CA Edition B 2011; 1; 2, en-US
d2mskot Version: 3.0.3.5
2010-04-21T17:25:06+02:00 - Seite 213
Z