Filter
Top Products
Standing lamps/parking lamps
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover : counter-clockwise
and pull it out.
X
Pull out bulb holder ;.
X
Take the bulb out of bulb holder ;.
X
Insert the new bulb into bulb holder ;.
X
Insert bulb holder ;.
X
Align housing cover : and turn it
clockwise until it engages.
Turn signals
X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder : counter-clockwise and
pull it out.
X
Turn the bulb counter-clockwise, applying
slight pressure, and remove it from bulb
holder :.
X
Insert the new bulb into bulb holder : and
turn it clockwise while applying slight
pressure.
X
Place bulb holder : in the headlamp so
that retainer = is upright and mark ; is
at the top.
X
Insert bulb holder : into the lamp and turn
it clockwise.
Changing the rear bulbs
Opening/closing the side trim
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
Left-hand side trim panel
Right-hand side trim panel
114
Changing bulbs
Lights and windshield wipers
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 114