Filter
Top Products
K
Tuning to a station via station search
(Y page 123)
Fast rewind (Y page 138)
Skipping backwards to a track
(Y page 138)
L
Tuning to a station via station search
(Y page 123)
Fast forward (Y page 138)
Skipping forwards to a track
(Y page 138)
M
Rejecting a call (Y page 158)
Ending an active call (Y page 158)
N
Confirming a passcode
(Y page 150)
Accepting a call (Y page 158)
Initiating a call (Y page 156)
Redial (Y page 157)
O
Switching sound on/off
(Y page 118)
Switching hands-free microphone
on/off (Y page 158)
P
Sound settings (Y page 118)
Audio display
!
Avoid touching the audio display at all
times. The display has a very sensitive high-
gloss surface, there is a risk of it being
scratched. Do not press directly in the
display face. Otherwise, the audio display
will be damaged.
i
For information about cleaning and care
of the audio display, see “Audio or
COMAND display” (Y page 231).
Display
The currently selected mode and the
associated menus are shown on the audio
display. The audio display is divided into
several areas.
Example illustration: Radio selected
Status line = displays the current settings
for radio and telephone mode.
You can request the required function using
menu bar :.
The selection is made using buttons
9:;=.
Mobile phone readiness is indicated by
additional information being shown in the
status line:
R
In the telephone main menu: Name of the
Bluetooth
®
device (calls made and
received via the Bluetooth
®
interface)
(Y page 151).
R
Mobile phone network signal strength
r. This information will only be shown
with suitable mobile phones.
R
The receiver symbol indicates whether a
call is active or not.
¢ No active call
ö Active call
In this example, the audio main function is set
to the FM radio mode and main area ; is
active.
i
The layout of the menus may vary
depending on your vehicle’s equipment.
This manual shows the menus for a fully
equipped vehicle.
Instrument cluster multifunction
display
Please refer to the “Control system” section
of this manual (Y page 93) for function
descriptions and operation of the instrument
cluster multifunction display and
114
Audio system
Controls in detail
171_AKB; 3; 60, en-US
d2ureepe, Version: 2.11.8.1
2009-05-11T16:00:23+02:00 - Seite 114