Filter
Top Products
Cluster submenu to change the instrument
cluster display settings.
The following functions are available:
R
Selecting speedometer display mode
(Y page 104)
R
Selecting language (Y page 104)
R
Selecting display (digital speedometer or
outside temperature) for status indicator
(Y page 104)
Selecting speedometer display mode
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instr. Cluster
submenu.
X
Press button & or * repeatedly until
the message Display Unit Speed-/
Odometer appears in the multifunction
display.
The selection marker is on the current
setting.
X
Press button W or X to set
speedometer unit to Km or Miles.
Selecting language
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instr. Cluster
submenu.
X
Press button & or * repeatedly until
the message Language appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select the
language to be used for the multifunction
display messages.
Selecting display (digital speedometer or
outside temperature) for status indicator
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instr. Cluster
submenu.
X
Press button & or * repeatedly until
the message Select Display appears in
the multifunction display.
The selection marker is on the current
setting.
104
Control system
Controls in detail
171_AKB; 3; 60, en-US
d2ureepe, Version: 2.11.8.1
2009-05-11T16:00:23+02:00 - Seite 104