Filter
Top Products
X
Place bulb socket ? back into the housing
and turn it clockwise until it engages.
X
Align housing cover : and turn it
clockwise until it engages.
Front turn signal lamp bulb
X
Turn bulb socket ; with the bulb
counterclockwise and remove it.
X
On both sides open catch A and pull bulb
B out of bulb socket ;.
X
Gently press the new bulb into bulb
socket ;.
X
Place bulb socket ; back into the housing
and turn it clockwise until it engages.
Parking and standing lamp bulb
X
Turn bulb socket : with the bulb
counterclockwise and remove it.
X
Pull the bulb out of bulb socket :.
X
Gently press the new bulb into bulb
socket :.
X
Place bulb socket : back into the housing
and turn it clockwise until it engages.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following:
X
Switch off the ignition.
X
Turn the exterior lamp switch to position
$.
Tail lamp unit
To access the tail lamp units, you first have to
remove the cover in the corresponding side
trim panel of the cargo compartment.
X
Open the tailgate.
Opening the driver’s side trim panel
X
Insert a suitable object such as a coin into
the slot of lock :.
X
Turn lock : by 90° in direction of the
arrow.
X
Remove cover ;.
316
Replacing bulbs
Practical hints
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 316