Filter
Top Products
Speedometer appears in the multifunction
display.
The selection marker is on the current
setting.
X
Press button W or X to set digital
speedometer unit to Km or Miles.
Selecting language
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instrument
Cluster submenu.
X
Press button & or * repeatedly until
the message Language appears in the
multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select the
language to be used for the multifunction
display messages.
Selecting display (digital speedometer or
outside temperature) for status indicator
X
Press button V or U repeatedly until
the Settings menu appears in the
multifunction display.
X
Press button &.
X
Move the selection marker with button
W or X to the Instrument
Cluster submenu.
X
Press button & or * repeatedly until
the message Status Line Display
appears in the multifunction display.
The selection marker is on the current
setting.
X
Press button W or X to select the
desired setting.
The selected display is then shown
continuously in the status indicator (lower
display).
The other display now appears in the
Standard display menu (Y page 126).
Time/Date submenu
Access the Time/Date submenu via the
Settings menu. Use the Time/Date
submenu to change the time and date display
settings.
The following functions are available:
R
Setting the time (Y page 133)
R
Setting the date (Y page 134)
If your vehicle is equipped with the COMAND
system and navigation module, see separate
COMAND system operating instructions for
information on how to set the time and date.
Setting the time
This function is not available if your vehicle is
equipped with the COMAND system and
navigation module.
Control system
133
Controls in detail
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 133
Z