Filter
Top Products
X
Removing: Open the tailgate (Y page 75).
X
Lift the cargo compartment floor and
secure it on the upper cargo compartment
lip (Y page 270).
!
To prevent damage, always disengage the
securing hook from upper cargo
compartment lip and lower the cargo
compartment floor before closing the
tailgate.
X
Remove the jack from the vehicle tool kit
(Y page 271).
X
Remove retaining screw : by turning it
counterclockwise.
i
If retaining screw : does not come
loose, turn storage well casing = slightly
counterclockwise. Retaining screw :
should then come loose easily.
X
Turn storage well casing = by
approximately 180°.
The electric air pump (Y page 271) points
towards the rear.
X
Remove storage well casing =.
X
Remove spare wheel ;.
For information on mounting the spare wheel,
see “Flat tire” (Y page 319).
Storing the spare wheel after use
There are two guide pins in the spare wheel
well that serve to hold the spare wheel in
place.
X
Place the spare wheel into the spare wheel
well.
X
Make sure the spare wheel is placed
precisely on guide pins :.
X
Place storage well casing = (Y page 273)
into the spare wheel.
The electric air pump (Y page 271) must
point to the rear.
X
Turn storage well casing = (Y page 273)
by approximately 180°.
The electric air pump (Y page 271) points
in direction of travel.
i
The storage well casing should now be
positioned according to the mounting
direction indicators (Y page 271).
X
Secure the spare wheel by turning retaining
screw : (Y page 273) clockwise.
X
Place the jack into the vehicle tool kit
(Y page 271).
Where will I find ...?
273
Practical hints
251_AKB; 4; 52, en-US
d2ureepe, Version: 2.11.8.1
2009-03-23T09:22:52+01:00 - Seite 273
Z