Filter
Top Products
X
Press the KEYLESS-GO start/stop button
once.
X
Remove the foot from the brake pedal.
Ignition is switched on automatically.
The message Charging Hybrid
Battery Please Wait appears in the
multifunction display.
Start the combustion engine when the
message Engine Can Now Be Started
appears in the multifunction display.
Depending on the high-voltage battery's
discharge, the charging procedure may
take up to 60 minutes.
X
After the combustion engine of your vehicle
has
been started, leave the engines of both
vehicles running at idle speed.
Disconnecting the jumper cables
X
Disconnect the jumper cables in reverse
order, starting with jump start terminal 4
(Y page 34).
X
Close the hood.
X
Drive the vehicle for some time in order to
charge the 12-volt battery and the high-
voltage battery.
Practical hints
35
164_ZA; 2; 2, en-US
d2ureepe, Version: 2.11.8.1
2009-05-12T15:08:04+02:00 - Seite 35
Z