Filter
Top Products
51
Getting started
Driving
1 Seat belt housing
2 Latch plate
3 Buckle
4 Release button
̈ With a smooth motion, pull the seat
belt from seat belt housing 1.
̈ Place the shoulder portion of the seat
belt across the top of your shoulder
and the lap portion across your hips.
̈ Push latch plate 2 into buckle 3 until
it clicks.
̈ If necessary, tighten the lap portion to
a snug fit by pulling shoulder portion
up.
̈ To release the seat belt, press release
button 4 and guide latch plate back to
seat belt housing 1.
Warning! G
Never let more people ride in the vehicle
than there are seat belts available. Be sure
everyone riding in the vehicle is correctly
restrained with a separate seat belt. Never
use a seat belt for more than one person at
a time.
Warning! G
Never ride in a moving vehicle with the seat
backrest in an excessively reclined position
as this can be dangerous. You could slide
under the seat belt in a collision. If you slide
under it, the seat belt would apply force at
the abdomen or neck. That could cause
serious or even fatal injuries. The seat back-
rest and seat belt provide the best restraint
when the wearer is in a position that is as
upright as possible and the seat belt is prop-
erly positioned on the body.
Warning! G
Read and observe the additional warning no-
tices in the “Safety and Security” section
(
୴ page 79).