Filter
Top Products
158
Controls in detail
Control system
Resetting all settings
You can reset the functions of most of the
submenus to the factory settings.
For safety, the
Light Circuit Headlamp
Mode
submenu in the
Lighting
menu can
be reset with the vehicle at standstill only.
̈ Press button è or ÿ repeatedly
until the
Settings
menu appears in the
multifunction display.
̈ Press the reset button in the instru-
ment cluster for approximately
3 seconds.
In the right multifunction display you
will see the request to press the reset
button again to confirm.
̈ Press the reset button again.
The functions of most submenus will
reset to factory settings.
Submenus in the Settings menu
̈ Press button è or ÿ repeatedly
until the
Settings
menu appears in the
multifunction display.
̈ Press button j.
In the right multifunction display you
see the collection of submenus. There
are more submenus than can be simul-
taneously displayed.
̈ Press button ç.
The selection marker moves to the next
submenu.
̈ Scroll down with the ç button,
scroll up with the æ button.
̈ With the selection marker on the de-
sired submenu, use the j button to
access the individual functions within
that submenu.
̈ Once within the submenu, use
the j button to move to the next
function or the k button to move to
the previous function within that sub-
menu.
̈ Use buttons æ or ç to change
the settings of the respective function.
i
The settings you have changed will not be
reset unless you confirm the action by pressing
the reset button a second time.