Filter
Top Products
311
Operation
Tires and wheels
If you want to set new reference values
manually:
̈ Using the Tire and Loading Information
placard on the driver’s door B-pillar
(
୴ page 294) or, if available, the
supplemental tire inflation pressure
information on the inside of the fuel
filler flap (
୴ page 279), make sure the
tire inflation pressure of all four tires is
correct.
̈ Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display menu
appears in the multifunction display
(
୴ page 143).
̈ Press button j or k repeatedly
until the current inflation pressure for
each tire appears in the display or the
following message appears in the
multifunction display:
Tire pressure
displayed after
driving for
a few minutes
.
̈ Press the reset button (୴ page 27).
The following message will appear in
the multifunction display:
Restart tire
pressure monitor?
̈ Press button æ.
The following message will appear in
the multifunction display:
Tire Pressure Monitor
Restarted
After driving a few minutes the system
verifies that the current tire inflation
pressures are within the system’s
specified range. Afterwards the current
tire inflation pressures are accepted
as reference pressures and then moni-
tored.
If you wish to cancel activation:
̈ Press button ç.
Warning! G
It is the driver’s responsibility to calibrate
the TPMS on the recommended cold infla-
tion pressure. Underinflated tires affect the
ability to steer or brake the vehicle. You
might lose control over the vehicle.
i
Restart the TPMS after adjusting the tire in-
flation pressure to the inflation pressure recom-
mended for the vehicle operating condition. Tire
pressure should only be adjusted on cold tires.
Observe the recommended tire inflation pres-
sure on the Tire and Loading Information placard
on the driver’s door B-pillar (
୴ page 294). Some
vehicles may have supplemental tire inflation
pressure information for driving at high speeds
(
୴ page 301) or for vehicle loads less than the
maximum loaded vehicle condition
(
୴ page 301). If such information is provided, it
can be found on the inside of the fuel filler flap.