Filter
Top Products
43
Getting started
Adjusting
Backrest tilt
̈ Press the switch forward or backward
in the direction of arrow 2.
Head restraint height
̈ Press the switch up or down in the
direction of arrow 3.
Seat height
̈ Press the switch up or down in the
direction of arrow 4.
Seat cushion tilt
̈ Press the switch up or down in the
direction of arrow 5 until your upper
legs are lightly supported.
Head restraint adjusting
Manually adjust the head restraint.
̈ Push or pull on the upper edge of the
head restraint cushion.
Comfort head restraint* adjusting
1 Head restraint side adjustment
2 Head restraint fore and aft adjustment
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust the head restraint so that it is as
close to the head as possible and the center
of the head restraint supports the back of
the head at eye level. This will reduce the po-
tential for injury to the head and neck in the
event of an accident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are
intended to help reduce injuries during an
accident.
i
Adjust the head restraint in such a way that
it is as close to the head as possible.
Warning! G
When folding back the side cushions, never
reach between the side cushion and the
mounting post. You could otherwise be
trapped.