Filter
Top Products
60
Getting started
Parking and locking
Turning off the engine
̈ Place the gear selector lever in
position P.
̈ Apply the parking brake (୴ page 59).
Turning off with the SmartKey
̈ Turn the SmartKey in the starter switch
to position 0 (
୴ page 36).
̈ Remove the SmartKey from the starter
switch.
The immobilizer is activated.
Turning off with KEYLESS-GO*
̈ Place the gear selector lever in P.
̈ Press the KEYLESS-GO start/stop but-
ton (
୴ page 37) to turn off the engine.
With the driver’s door closed, the start-
er switch is now in position 1. With the
driver’s door opened, the starter switch
is set to position 0, same as SmartKey
removed from starter switch
(
୴ page 36).
i
Always set the parking brake in addi-
tion to shifting to position P.
On slopes, turn the front wheels to-
wards the road curb.
i
The SmartKey can only be removed
from the starter switch with the gear
selector lever in position P.
i
With the SmartKey removed and the
driver’s door open, a warning sounds if
the vehicle’s exterior lamps are not
switched off.