Filter
Top Products
43
Getting started
Adjusting
Easy-entry/exit feature
This feature allows for easier entry into and
exit from the vehicle. When entering and
exiting the vehicle, the steering wheel is in
its uppermost position.
The easy-entry/exit feature can be activat-
ed or deactivated in the
Convenience
sub-
menu of the control system (
୴ page 156).
With the easy-entry/exit feature activated,
the steering wheel will return to its last set
position when you:
ț close the driver’s door with the ignition
switched on
or
ț insert the SmartKey into the starter
switch or press the KEYLESS-GO*
start/stop button (
୴ page 37) once
with the driver’s door closed
With the easy-entry/exit feature activated,
the steering wheel tilts upwards when you
ț remove the SmartKey from the starter
switch,
or
ț open the driver’s door with the
SmartKey in starter switch position 0
or 1 or the KEYLESS-GO* start/stop
button in position 1 (
୴ page 37)
Warning! G
You must make sure no one can become
trapped or injured by the moving steering
wheel when the easy-entry/exit feature is
activated.
To stop steering wheel adjustment, do one
of the following:
ț Move steering column stalk
(୴ page 42).
ț Press one of the memory position but-
tons* or the memory button M*
(
୴ page 121).
Do not leave children unattended in the ve-
hicle, or with access to an unlocked vehicle.
Children could open the driver’s door and
unintentionally activate the easy-entry/exit
feature, which could result in an accident
and/or serious personal injury.
i
The last set steering wheel position is
stored when
ț the ignition is switched off
(
୴ page 36)
ț the position is stored in memory
(
୴ page 121)