Filter
Top Products
125
Controls in detail
Lighting
̈ Turn the exterior lamp switch to posi-
tion U.
With the SmartKey in starter switch
position 1 or the KEYLESS-GO
start/stop button pressed once, only
the parking lamps will switch on and off
automatically.
When the engine is running, the low
beam headlamps, the tail and parking
lamps, the license plate lamps, and the
side marker lamps will switch on and
off automatically.
Daytime running lamp mode
̈ Turn the exterior lamp switch to
position M or U.
When the engine is running, the low
beam headlamps are switched on auto-
matically.
In low ambient light conditions, the fol-
lowing lamps will switch on additional-
ly:
ț Tail lamps
ț Side marker lamps
ț Parking lamps
ț License plate lamps
For nighttime driving you should turn the
exterior lamp switch to position B to
permit activation of the high beam head-
lamps.
i
With the daytime running lamp mode
activated and the exterior lamp switch
in position M, the highbeam head-
lamps cannot be switched on.
The highbeam flasher is available at all
times.