Filter
Top Products
394
Practical hints
Replacing bulbs
Replacing bulbs for front lamps
Before you start to replace a bulb for a
front lamp, do the following first:
̈ Turn the exterior lamp switch to posi-
tion M (
୴ page 123).
̈ Open the hood (୴ page 272).
1 Bulb socket for turn signal lamp
2 High beam headlamp cover
3 Low beam headlamp cover (Xenon or
Bi-Xenon* lamp). Do not remove.
4 High beam bulbs
5 Locking mechanism
6 Parking and standing lamps
Front turn signal bulb
̈ Turn bulb socket 1 counterclockwise
and pull it out.
̈ Push the bulb into socket 1, turn
socket 1 counterclockwise and re-
move it.
̈ Insert the new bulb in socket 1, push
and turn bulb socket 1 clockwise.
̈ Reinsert bulb socket 1 in lamp and
turn bulb socket 1 clockwise.
Warning! G
Do not remove the cover for the Xenon or
Bi-Xenon* headlamp. Because of high volt-
age in Xenon and Bi-Xenon* lamps, it is dan-
gerous to replace the bulb or repair the lamp
and its components. We recommend that
you have such work done by a qualified
technician.