Filter
Top Products
49
Getting started
Driving
High beam
The combination switch is located on the
left of the steering column.
Combination switch
1 High beam
2 High beam flasher
̈ Push combination switch in direction of
arrow 1.
The high beam headlamp indicator
lamp A in the instrument cluster
comes on (
୴ page 24).
For more information on headlamps, see
“Lighting” (
୴ page 114).
Turn signals
The combination switch is located on the
left of the steering column.
Combination switch
1 Turn signals, right
2 Turn signals, left
̈ Press combination switch in direction
of arrow 1 or 2.
The corresponding turn signal indicator
lamp L or K in the instrument
cluster flashes (
୴ page 24).
The combination switch resets auto-
matically after major directional
changes.
i
If the combination switch is pressed to
point of resistance the turn signals will
flash three times.