Filter
Top Products
346
Operation
Maintenance
Setting the date for special works
You can enter appointments for exhaust
gas analysis and general inspection using
the maintenance system.
̈ Switch on the ignition (୴ page 33).
The standard display of the control sys-
tem appears (
୴ page 145).
̈ Press button k or j on the mul-
tifunction steering wheel until the
maintenance indicator appears in the
multifunction display.
̈ Press the reset button (୴ page 24) for
about five seconds.
The
Service menu
appears in the multi-
function display.
̈ Select the
Addit. Work
menu with the
+ or - button.
̈ Press the ÿ button.
The service indicator now displays the
Addit. Work
menu.
̈ Select the
Exh.-gas analysis
or
General inspection
menu with the
+ or - button.
̈ Press the ÿ button.
The service indicator now displays the
Next due date
menu.
̈ Select the
Month a
nd
Year
with the
+ or - button.
̈ Press button k or j on the mul-
tifunction steering wheel to set the
month and year.
̈ Select
Confirm
with the + or -
button.
̈ Press the ÿ button.
The new date is set.