Filter
Top Products
184
Controls in detail
Automatic transmission
Downshifting
̈ Briefly press the gear selector lever to
the left in the D- direction
(
୴ page 176).
or
̈ Press button 1 on the left side of the
steering wheel (
୴ page 181).
The transmission shifts to the next
lower gear.
Upshifting
̈ Briefly press the gear selector lever to
the right in the D+ direction
(
୴ page 176).
or
̈ Press button 2 on the right side of the
steering wheel (
୴ page 181).
The transmission shifts to the next
higher gear.
If, instead of the manual program mode
symbol
M
, the p symbol appears in
the multifunction display (
୴ page 174),
shift to the next higher gear. The fuel
supply will otherwise be interrupted to
prevent the engine from overrevving.
Warning! G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.
i
When you brake or stop, the transmis-
sion shifts down to a gear from which
you can easily accelerate or take off.
!
In the manual program mode M, the
transmission will not upshift, even if
the engine has reached its overrevving
range. Shift up to the next gear before
the engine has reached its overrevving
range. Make absolutely certain that the
engine speed does not reach the red
marking on the tachometer
(
୴ page 24). Otherwise the engine
could be damaged which is not covered
by the Mercedes-Benz Limited
Warranty.