Filter
Top Products
171
Controls in detail
Control system
Resetting fuel consumption statistics
̈ Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
̈ Press button j or k repeatedly
until you see the reading that you want
to reset in the display.
̈ Press and hold the reset button in the
instrument cluster (
୴ page 24) until
the value is reset to
0
.
Call up range (distance to empty)
̈ Press button ÿ or è repeatedly
until you see the first function of the
Trip computer menu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
Range:
In the display you will see the calculat-
ed range based on the current fuel tank
level.
TEL menu*
You can use the functions in the
TEL
menu
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
̈ Switch on the telephone and COMAND.
̈ Press button ÿ or è on the
steering wheel repeatedly until you see
the
Tel
menu in the display.
Warning! G
A driver’s attention to the road must always
be his/her primary focus when driving. For
your safety and the safety of others, we rec-
ommend that you pull over to a safe location
and stop before placing or taking a tele-
phone call. If you choose to use the tele-
phone while driving, please use the
hands-free device and only use the tele-
phone when weather, road and traffic condi-
tions permit.
Some jurisdictions prohibit the driver from
using a cellular telephone while driving a ve-
hicle.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle’s electronic system, pos-
sibly resulting in an accident and/or
personal injury.