Filter
Top Products
185
Controls in detail
Audio system
Manual tuning
̈ Select desired waveband.
̈ Press S or T button for approx.
three seconds.
̈ Press button repeatedly until desired
frequency has been reached.
Step-by-step station tuning takes place
in ascending or descending order. Each
time the button is pressed, the radio
tunes further by 0.2 MHz. During
manual tuning, the radio is muted.
Automatic seek tuning
̈ Select desired waveband.
̈ Press S or T button briefly.
The radio will tune to the next highest
or next lowest receivable frequency.
Scan search
ț Starting scan search
̈ Select desired waveband.
̈ Press
SC
soft key.
SC will appear in the display. The
radio briefly tunes in all receivable
stations on the waveband selected.
i
You can only enter frequencies within
the respective waveband.
If a button is not pressed within
four seconds, the radio will return to
the last station tuned.
i
If no station is received after two
consecutive scans of the complete
frequency range, then the scan stops
at the frequency from which it began.