Filter
Top Products
242
Controls in detail
Panorama roof with power tilt/sliding panel*
Opening and closing the roller
sunblinds
̈ To open or close the roller sunblinds,
move the roof panel switch to the resis-
tance point in the required
direction 1 to 4.
Release the roof panel switch when the
roller sunblinds have reached the de-
sired position.
Fully opening the roller sunblinds
(Express-open)
̈ Move the roof panel switch past the
resistance point in the required
direction of arrow 1 or 4 and
release.
The roller sunblinds open completely.
Stopping the roller sunblinds during
Express-operation
̈ Move the roof panel switch in any
direction.
Opening and closing the panorama roof
with power tilt/sliding panel
The tilt/sliding panel is opened and closed
electrically. The roof panel switch is locat-
ed on the overhead control panel.
The tilt/sliding panel only operates with
the roller sunblinds opened.
Roof panel switch
1 Push up to raise roof panel at rear
2 Pull down to lower roof panel at rear
3 Push forward to slide roof panel closed
4 Push back to slide roof panel open
Warning! G
When closing the roller sunblinds, make
sure that no one is in danger of being injured
by the closing procedure. The closing of the
roller sunblinds can be immediately halted
by releasing the switch.