Filter
Top Products
198
Controls in detail
Loading
Folding the backrest forward
̈ Pull release handle 1.
̈ Fold seat cushion 2 forward.
̈ Fully retract and fold rearward head re-
straints (
୴ page 92).
̈ Pull release lever 3.
̈ Fold backrest 4 forward.
Setting up rear seat bench
̈ Fold backrest rearward until it engag-
es.
̈ Fold seat cushion rearward until it
locks into position.
If the backrest is not locked into position,
a red indicator 1 will be visible.
̈ Check for secure locking by pushing
and pulling on the backrest.
Warning! G
If a red indicator is visible with the backrest
up, then the backrest is not properly locked
into position.
Always lock backrest in its upright position
when rear seat bench is occupied, or the ex-
tended cargo compartment is not in use.
Check for secure locking by pushing and
pulling on the backrest.
In an accident, during hard braking or sud-
den maneuvers, loose items will be thrown
around inside the vehicle, and cause injury
to vehicle occupants unless the items are
securely fastened in the vehicle.
To help avoid personal injury during a colli-
sion or sudden maneuver, exercise care
when transporting cargo.