Filter
Top Products
193
Controls in detail
Panorama sliding/pop-up roof*
Synchronizing the panorama
sliding/pop-up roof and the roller sun-
blinds
It is necessary to resynchronize the pan-
orama sliding/pop-up roof after
ț voltage supply interruption due to a
disconnected or discharged battery
ț the panorama sliding/pop-up roof has
been closed manually
ț the panorama sliding/pop-up roof has
been opened with an abrupt movement
ț a malfunction.
̈ Switch on ignition.
̈ Move the switch in direction 3 and
wait until the roller sunblind are fully
closed.
Hold the switch for approximately
one second.
̈ Move the switch in the direction 4
and wait until the roller sunblind is ap-
proximately 4 in (10 cm) opened.
Release the switch.
̈ Move the switch in the direction 3
and wait until the roller sunblind is fully
closed.
Hold the switch for approximately
one second.
The roller sunblind is synchronized.
̈ Move the switch in direction 4 and
wait until the roller sunblind are fully
opened.
Hold the switch for approximately
one second.
̈ Move the switch in the direction 4
and wait until the panorama slid-
ing/pop-up roof is approximately 4 in
(10 cm) opened.
Release the switch.
̈ Move the switch in the direction 3
and wait until the panorama slid-
ing/pop-up roof is fully closed.
Hold the switch for approximately
one second.
The panorama sliding/pop-up roof is syn-
chronized when the panorama slid-
ing/pop-up roof opens automatically.
Repeat synchronization if necessary.