Filter
Top Products
125
Controls in detail
Control system
Selecting display (speed display or out-
side temperature)
̈ Move the selection marker with
the æ or ç button to the
IN-
STRUMENT CLUSTER
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
SELECT DISPLAY
.
The selection marker is on the current
setting.
̈ Press æ or ç to select the dis-
play permanently shown in the multi-
function display.
Lighting submenu
Access the
LIGHTING
submenu via the
SET-
TINGS
menu. Use the
LIGHTING
submenu
to change the lamp and lighting settings on
your vehicle. The following functions are
available:
Setting daytime running lamp mode
(USA only)
̈ Move the selection marker with
the æ or ç button to the
LIGHT-
ING
submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
LIGHT CIRCUIT HEADLIGHT MODE
.
The selection marker is on the current
setting.
̈ Press æ or ç to select manual
or daytime running lamp (constant)
mode. This function is not available in
countries where daytime running
lamps are mandatory.
Function Page
Set daytime running lamp mode
(USA only)
125
Set locator lighting 126
Exterior lamps delayed shut-off 127
Interior lighting delayed shut-off 128
୴୴