Filter
Top Products
Black plate (22,1)
With retractable type key
Lock button
Unlock button
Operation
indicator light
Programming
One seat position can be programmed into
each advanced key/retractable type key.
After the following conditions have been
met, operate the seat and the advanced
key/retractable type key to program the
seat positions.
l
The ignition switched off
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
1. Adjust the seat to the desired position.
For each seat position adjustment
method, refer to the following pages:
Seat Slide (page 2-5)
Seat Recline (page 2-5)
Height Adjustment (page 2-6)
2. Press and hold the unlock button on the
advanced key/retractable type key
while pressing the set button until a
beep sound is heard.
The advanced key/retractable type key
is programmed after a beep sound is
heard.
Seat position activation
With the ignition switched off, unlock the
doors using any of the following methods
and open the driver's door within about 40
seconds to set the driver's seat to a pre-
programmed position.
l
Press the unlock switch on the
advanced key/retractable type key.
l
Press the request switch on a front door
while the advanced key is being
carried.
NOTE
If any of the following occurs, the seat position
activation function cancels:
l
The lock/unlock button is pressed while the
key is not inserted into the ignition switch
or the key slot.
l
A seat adjustment switch is operated.
l
The vehicle starts moving.
l
The selected programming button 1, 2, or 3.
l
The request switch on a front door is
pressed while the advanced key is being
carried.
l
The set switch is pressed.
Erasing memory
After the following conditions have been
met, press the lock button on the
advanced key/retractable type key while
pressing the set button until a beep sound
is heard.
l
The ignition switch is in the LOCK
position
(The auxiliary key/retractable type key
is removed from the ignition switch)
l
The driver's door is open
2-8
Essential SafetyEquipment
Seats
Mazda3_8AD2-EA-08K_Edition1 Page22
Thursday, October 9 2008 1:4 PM
Form No.8AD2-EA-08K