Filter
Top Products
Black plate (232,1)
NOTE
l
Before using the auxiliary jack, read
the manufacturer's instructions for
the product being connected.
l
Use a commercially-available, non-
impedance (3.5
) stereo mini plug
for connecting the portable audio
unit to the auxiliary jack. Before
using the auxiliary jack, read the
manufacture's instructions for
connecting a portable audio unit to
the auxiliary jack.
l
To prevent discharging of the battery,
do not use the auxiliary input for
long periods with the engine off or
idling.
l
Noise may occur depending on the
product connected to the auxiliary
jack.
l
If a power supply from the portable
audio unit is needed, use the unit's
batteries. Using the power socket
equipped on the vehicle may cause
noise depending on the unit
connected to the power supply
socket.
Connecting the auxiliary jack
When placing portable audio units or
similar products in the tray while
connected to the auxiliary jack, pass the
connection plug cord through the slot in
the cap.
Cap slot, closed
Cap slot, opened
1. Open the lid by pulling the upper
release catch.
2. Remove the tray mat.
3. Using a coin, turn the cap
counterclockwise (about 45° from the
closed position) and remove it.
NOTE
Do NOT discard the cap.
6-48
Interior Comfort
Audio System
Mazda3_8V66-EA-06F_Edition2 Page232
Friday, May 26 2006 10:55 AM
Form No.8V66-EA-06F