Filter
Top Products
Black plate (156,1)
NOTE
l
(Standard meter)
The odometer and trip meter can be
displayed as follows even when the
ignition switch is in the ACC or
LOCK position.
l
Displays for 10 minutes after the
ignition switch is turned to the
ACC or LOCK position from the
ON position.
l
Displays for 10 minutes after the
driver's door is opened.
l
(Black-out meter)
When the ignition switch is in the
ACC or LOCK position, the
odometer or trip meters cannot be
displayed, however, pressing the
selector button can inadvertently
switch the trip meters or reset them
during an approximate ten-minute
period in the following cases:
l
After the ignition switch is turned
to the ACC or LOCK position
from the ON position.
l
After the driver's door is o pened.
Odometer
The odometer records the total distance
the vehicle has been driven.
Trip meter
The trip meter can record the total
distance of two trips. One is recorded in
trip meter A, and the other is recorded in
trip meter B.
For instance, trip meter A can record the
distance from the point of origin, and trip
meter B can record the distance from
where the fuel tank is filled.
When trip meter A is selected, pressing
the selector again within one second will
change to trip meter B mode.
When trip meter A is selected, TRIP A
will be displayed. When trip meter B is
selected, TRIP B will be displayed.
The trip meter records the total distance
the vehicle is driven until the meter is
again reset. Return it to “0.0” by holding
the selector depressed for more than 1
second. Use this meter to measure trip
distances and to compute fuel
consumption.
NOTE
l
Only the trip meters record tenths of
kilometers (miles).
l
The trip record will be erased when:
l
The power supply is interrupted
(blown fuse or the battery is
disconnected).
l
The vehicle is driven over 999.9
km (mile).
5-34
Driving YourMazda
Instrument Cluster and Indicators
Mazda3_8V66-EA-06F_Edition2 Page156
Friday, May 26 2006 10:54 AM
Form No.8V66-EA-06F