Filter
Top Products
Black plate (198,1)
qOperation of Automatic Air
Conditioning
1. Press the AUTO switch. Selection of
the airflow mode, air intake selector
and amount of airflow will be
automatically controlled.
2. Use the temperature control dial to
select a desired temperature.
Cold Hot
To turn off the system, press the OFF
switch.
NOTE
l
Setting the temperature to maximum
high or low will not provide the
desired temperature at a faster rate.
l
When selecting heat, the system will
restrict airflow until it has warmed to
prevent cold air from blowing out of
the vents.
q
Windshield Defrosting and Defogging
Press the windshield defroster switch.
In this position, the
position is
automatically selected, and the air
conditioner automatically turns on. The
air conditioner will directly dehumidify
the air to the front windshield and side
windows (page 6-4). Airflow amount will
be increased.
WARNING
Set the temperature control to the hot
or warm position when defogging (
position):
Using the
position with the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog up.
Your vision will be hampered, which
could lead to a serious accident.
NOTE
Use the temperature control dial to
increase the air flow temperature and
defog the windshield more quickly.
6-14
Interior Comfort
Climate Control System
Mazda3_8V66-EA-06F_Edition2 Page198
Friday, May 26 2006 10:54 AM
Form No.8V66-EA-06F