Filter
Top Products
48
4. To set the lower boundary for the Zone Alarm, use ← or→ to select
LOWER, then press ↑ or ↓ to move the bottom of the bar to the desired depth.
5. Press
EXIT|← to ZONE ALARM ENABLED|ENT|EXIT. Now, any echo —
fish, bottom, structure — within the zone alarm's depth range will trig-
ger the zone alarm.
6. To turn off the alarm Press the
ALARM key on the front of the unit or
press
MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press
ENT. Press ↓ to ZONE ALARM ENABLED|ENT|EXIT.
To switch to a different depth setting, open the Sonar Alarms menu and
repeat the instructions in steps 3 and 4 above.
Fish Alarm
Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D. feature (Fish I.D.
must be turned on for the Fish Alarm to work). a different tone sounds
for each fish symbol size shown on the display.
Sonar Alarms menu with Fish Alarm selected. The check box to the left
is blank, indicating the alarm is turned off.
To turn the fish alarm on
1. Press the ALARM key on the front of the unit or press MENU|MENU and
use ↑ or ↓ to select Sonar Alarms, then press
ENT.
2. Press ↓ to
FISH ALARM|ENT|EXIT.
3. To turn off the alarm, Press the
ALARM key on the front of the unit or
press
MENU|MENU and use ↑ or ↓ to select Sonar Alarms, then press
ENT. Press ↓ to FISH ALARM|ENT|EXIT.
Brightness
See the entry in this section for Screen Contrast and Brightness.