Filter
Top Products
88
Units of Measure
This menu (shown in the following image) sets the speed and distance
(statute or nautical miles, meters), depth (feet, fathoms, or meters), al-
titude (feet or meters), heading (true or magnetic), and pressure (milli-
bars or inches) units. To change the units, press
MENU|MENU|↓ to
SYSTEM SETUP|ENT|ENT.
The Units of Measure Menu.
To set Unit of Measure: Use the arrow keys to select the label of the
unit of measure you want to change and then press
ENT. Press ↑ or ↓ to
select the display unit you want, then press
ENT. After the option is set,
press
EXIT|EXIT to return to the page display.
Use Indoors
When you're only using your iFINDER to listen to music, you can pre-
serve battery life by turning off the GPS satellite search. To do this,
turn on the Use Indoors option.
To toggle this feature on or off from the Music Mode, press
MENU|↓ to
USE INDOORS|ENT. The box is checked when the feature is turned on, and
unchecked when the feature is off. The iFINDER will automatically
resume searching for satellites the next time you turn it on.