Filter
Top Products
35
You can choose how to display the Compass's orientation. The options
are "North Up," "Heading Up," and "Bearing Up."
With North Up, North the unit always places North at top of the screen.
As you turn and change your facing direction (your heading), the heading
indicator arrow will move along the edge of the compass rose.
When using Heading Up, the unit keeps your heading indicator arrow
at the top of the screen, so no matter which was you turn, the arrow
stays up, but the compass rotates under it to tell your facing.
When you're navigating to a waypoint or any other destination, you can
turn on Bearing Up, which keeps the direction to your destination at the
top of the screen while your heading indicator swings around the compass
rose. That way, all you have to do to navigate to your destination is keep
turning so that your arrow points closer and closer to the top of the screen.
Navigation Page, recording a trail, traveling east. Page looks like this
when iFINDER is not navigating to a waypoint, following a route, or
backtracking a trail.
When navigating to a waypoint or following a route, the Navigation
screen looks like the one shown in the following image. Customizable
data boxes on this screen can show information such as your ground
speed, track, distance and bearing to destination.
Compass
rose
Track or compass
heading indicator,
showing facing
direction
Battery power
indicator
Navigation
information
data boxes