Filter
Top Products
30 31
www.lowrance.com
Transducers
Lowrance integrates with the widest choice of high-sensitivity transducers to suit
your boat, your preference and your expectations for superior performance in
shnding and bottom sounding, at virtually any depth.
Performance Transducers
Transom-Mount Skimmer
®
Transducers
Popular, proven and so much better by design, they’re patented. High-speed Skimmer
®
transom-mount transducers
slice smoothly through water without sonar-interfering bubbles. So you enjoy ideal sounding performance and the
cleanest sonar readings, even at speeds up to 70 mph/61 kts. Ideal for aluminum- and steel-hull outboard and
stern-drive (I/O) boats, each Skimmer
®
includes a built-in sensor for water temp readings. Plus, the special “kick-up”
bracket helps prevent accidental strike damage.
P79 In-Hull – 50/200 kHz, 600W RMS
Easily adjusts to hull deadrise angles up to 22º to ensure the beam is correctly oriented
for accurate depth readings. The base is bonded to the hull and lled with liquid, and the
transducer then attaches to the base with a twist lock. The sound waves travel more
efciently though the liquid, giving the best possible performance.
M260 In-Hull –
50/200 kHz, 1kW RMS
A high performance model for 300 W-1 kW
echosounders with separate 50 kHz and
200 kHz elements for excellent deep-water
performance and exceptional bottom and
water column detail. Designed for bow stern
or port starboard in-hull mounting, the
narrow beam provides crisp image detail
especially suited for shing shelves,
intricate bottom structures and wrecks with
precise readings even at boat speeds above
20 knots.
P319 Thru-Hull –
50/200 kHz, 600W RMS
Features a 50/200 kHz, dual-
frequency, single-ceramic element in a
low-prole housing. Plastic, bronze or
stainless steel models are available to
accommodate all hull types with a ush
design that minimizes drag.
B60 Thru-Hull –
50/200 kHz, 600W RMS
The bronze B60-12º provides a vertical
beam without a fairing. An internal ceramic
element is tilted to provide built-in deadrise
compensation providing excellent echo
returns for more accurate depth readings.
The nearly ush housing minimizes drag.
B164 Thru-Hull –
50/200 kHz, 1kW RMS
Tilted Element™ technology lets you step
up to higher 1kW power without a fairing.
Flush mounted with less than 6.35 mm
(0.25”) hull exposure, it can sit on trailer
rollers and bunks with no damage at all.
Perfect for fast, trailered tournament
sport shing vessels who cannot have a
high-performance fairing, the internal
tilted ceramic array focuses the perfect
vertical beam with maximum energy
directly below your boat.
B258 Thru-Hull –
50/200 kHz, 1kW RMS
Excellent sportshing performance for
a moderately priced 1 kW transducer.
The economical, four-ceramic element
design provides deep water sounding
with superb target and bottom
denition. Airmars high-performance
fairing recommended for the best
possible results.
B260 Thru-Hull –
50/200 kHz, 1kW RMS
One of the best high-performing 1 kW
bronze thru-hull for 300 W to 1 kW
echosounders. Separate 50 kHz and
200 kHz elements for unparalleled
deep water performance and
unmatched bottom and water column
detail. Provides crisp image detail for
shing shelves, intricate bottom
structures and wrecks.
B744V Thru-Hull –
50/200 kHz, 600W RMS
Drill only one hole in your boat with this
TRIDUCER
®
multisensor model that
features depth, speed, and temperature
in a single housing. Single ceramic
50/200 kHz dual frequency element for
excellent shallow water detail and deep
water bottom tracking. Extended stem
length provides extra height for steep
deadrise vessels or thick cored hulls.
200 kHz Skimmer
®
The choice for inland freshwater and
in-shore coastal saltwater angling.
Built-in temp sensor and up to 120º of
wide sh detection coverage with the
added 83 kHz operation feature when
used with HDS models. Also used for
shoot-thru sounding (without temp
readings) on berglass hulls with proper
installation.
200 kHz Skimmer
®
Portable
For go-anywhere portability, and a handy
option for the IceMachine™ portable, with
easy-mounting suction cup bracket. Built-in
temp sensor and up to same 120º coverage
with HDS sounder connection. Not for
high-speed use.
50/200 kHz Skimmer
®
For deeper salt water or downrigger
tracking with built-in temp sensor. Not
for shoot-thru-hull use.
Versatile 200 kHz Pod
Transducers
Expanded underwater coverage with the
versatility of trolling motor mount, or
shoot-thru operation on solid berglass
hulls. Contour curve top and slot for hose
clamp simplies motor-mounting. Available
with or without built-in temp sensor, all
deliver wider sh detection coverage with
high-sensitivity settings.
Deep-Sounding Transducers
Lowrance also connects with a wide selection of Airmar thru-hull and in-hull transducers
made for ultimate deep-sounding performance while reducing or eliminating drag.