Filter
Top Products
19
GlobalMap 8300cHD and GlobalMap 9300cHD) the Log Radar Data
feature will be available on the Radar menu, allowing you to save radar
logs. Saving a radar log allows you to reuse the log in the unit's simula-
tor.
If your unit does not have a hard drive you will not see the Log
Radar Data command on your Radar menu.
Log Radar Data menu.
To record a radar log:
1. Press MENU, select LOG RADAR DATA and press ENT.
2. Press
ENT to start logging.
The Chart Logging menu also allows you to change the file name or
browse through data files on your MMC or SD card.
To change the file name:
1. Press MENU, select LOG RADAR DATA and press ENT. Press ↓ to File
Name and press
ENT.
2. Press ↑ ↓ to change the first letter, then press → to move to the next
letter. Repeat these steps until the desired name has been entered.
Press
ENT. Press EXIT.
To browse data files:
1. Press MENU, select LOG RADAR DATA and press ENT. Select BROWSE FILES
and press ENT.
2. Use ↑ ↓ to scroll through the available files. Press
EXIT|EXIT.
When you select a file from the file browse menu, you can copy, delete,
play or stop playing a data file.