Filter
Top Products
7
8. Use ↑ ↓ to highlight one of the three full color options and press
ENT.
Press
EXIT to return to the main page display.
Auto Power-On
When the Auto Power-on feature is turned on, the radar will start
warming up every time the display unit is turned on. Access the Com-
munications Port menu to turn on or turn off the Auto Power-on fea-
ture.
Caution:
If you do not plan to use your radar every time the display unit
is turned on, you need to turn off the Auto Power-On feature.
Turning on/off Auto Power-On:
1. From the Radar Page, press MENU, select RADAR SETUP and press ENT.
2. Highlight
RADAR AUTO POWER ON and press ENT, which will check (turn
on) or uncheck (turn off) the radar checkbox. Auto Power-On is active
when there is an "X" in the Radar Auto Power On checkbox.
3. Press
EXIT to return to the main radar display.
Communications Port menu with Auto Power-On feature turned on.
Radar Setup
The Radar Setup menu allows you to set up and adjust radar settings.
Most of the settings in the Radar Setup menu will only have to be set
once, but we recommend you check the settings periodically for general
maintenance.
NOTE:
Before starting radar setup, take your vessel out on open water
with fairly calm seas, like an open bay.
The two setup features we want to modify are Adjust Trigger Delay and
Adjust Heading Line.