Filter
Top Products
22
3. MENU – Press this key to show the menus and submenus, which
allow you to select a command or adjust a feature. This also accesses
search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS – These keys are used to navigate through the
menus, make menu selections, move the map cursor and enter data.
5. ENT/ICONS (Enter & Icons) – This key allows you to save data, ac-
cept values or execute menu commands. It is also used to create event
marker icons.
6. EXIT – The Exit key lets you return to the previous screen, clear
data or erase a menu.
7. WPT – (Waypoint) The Waypoint key is used to save and recall way-
points, search for waypoints and access the waypoint list. It also
launches the Point-of-Interest (POI) search menus and is involved in
some navigation functions.
8. ZOUT – (Zoom Out) – This key lets you zoom the screen out. On the
Map Page, this lets you see a larger geographic area on the map. Less
detail is seen as you zoom out.
9. ZIN – (Zoom In) – This key lets you zoom the screen in. On the Map
Page, zooming in lets you see greater detail in a smaller geographic
area on the map.
Power/lights on and off
To turn on the unit, press
PWR
. As the unit powers up, the Map Page is
displayed first. (To switch to another page, press
PAGES
|← or → to
Page Name|
EXIT
.)
To turn on the backlight, press
PWR
again. The unit has three backlight
levels to select from. Repeatedly pressing
PWR
will cycle through the
backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the
PWR
key for 3 seconds.
Main Menu
The GlobalMap 7000C has a Main Menu, which contains some function
commands and some setup option commands. The tutorial lessons in
this section will deal only with functions, the basic commands that
make the GlobalMap 7000C do something. The unit will work fine for
these lessons right out of the box with the factory default settings. But,
if you want to learn about the various options, see Sec. 5, System Setup
and GPS Setup Options.
You can access the Main Menu from any of the three Page screens by
pressing
MENU
|
MENU
. To clear the menu screen and return to the page
display, press
EXIT
.