Filter
Top Products
8
Radar only highlighted on Radar Pages menu (left). Radar menu with
Radar Power selected (right).
6. Press MENU, then use ↑ ↓ to select RADAR POWER from the radar menu
and press
ENT. A confirmation message will appear. Press ← to select
YES and press ENT. A warm-up countdown will commence that will vary
depending on the model of radar you have.
7. After the countdown is finished, the unit will enter STANDBY mode.
8. Access the Radar Setup menu to make sure your radar display is set
to Heading Up and is set to a Full Color scheme. Press MENU, select
RADAR SETUP and press ENT.
Radar Setup selected from Radar menu (left). Radar Setup menu with
Full Color on Black highlighted (right).
9. Highlight HEADING UP and press ENT, which will set the radar to
Heading Up.
10. To display the radar images in full color, press ↓ to select
RADAR
COLOR SCHEME and press ENT.
11. Use ↑ ↓ to highlight one of the three full color options and press
ENT. Press EXIT to return to the main page display.