Filter
Top Products
118 | | PB
HDS Gen2 Touch
Selecting a trolling motor type
1. Access the Network menu
2. Select Device list
3. Select the position sensor (SLS-100) from the device list
4. Select Calibrate on the device information dialog
5. Select your trolling motor type
6. Select Calibrate
7. Select OK on the confirmation dialog
Displaying SpotlightScan view
SpotlightScan images are viewed on the Structure page. You can set
up combo pages to view SpotlightScan images, broadband sonar
and DownScan images at the same time.