Filter
Top Products
56 | | 57
StructureScan | Lowrance HDS Gen2 Touch StructureScan | Lowrance HDS Gen2 Touch
StructureScan™ menu
When the cursor is active, some features on the
StructureScan menu will be replaced with cursor mode
features.
Tap Clear cursor to return to the normal StructureScan
menu.
Range
DownScan range controls the water depth that is visible
on the screen.
SideScan range controls how much of the side view will
be visible on the screen.
Tap the range keys on the touchscreen to adjust the range on both
DownScan and SideScan images.
Auto range
When the range is set to Auto the system will automatically set the
range depending on the water depth.
Preset range levels
You can select between several preset range levels.
When manually changing the range the upper depth line will always
be at the water surface. This options allows you to focus on echoes
at the upper part of the water column.
Frequency
StructureScan supports two frequencies. 455 kHz has excellent
resolution and greater range, while 800 kHz provides better
definition at shallower depths.
Advanced
Surface clarity
Wave action, boat wakes and temperature inversion can cause on-
screen clutter near the surface.
The clarity option reduces surface clutter by decreasing the
sensitivity of the receiver near the surface.
Noise rejection
Signal interference from bilge pumps, engine vibration and air
bubbles can clutter the StructureScan image The noise rejection op-
tion filters the signal interference and reduces on-screen clutter.
No cursor Active cursor