Lowrance electronic 10771001 GPS Receiver User Manual


 
| 39
Navigating | Lowrance HDS Gen2 Touch
Arrival radius
Sets an invisible circle around the destination
waypoint.
The vessel is considered arrived at the waypoint
when it is within this radius.
XTE limit (Cross track error)
This parameter defines the vessel’s accepted
offset distance from the leg. If the vessel goes
beyond this limit an alarm will be activated.
XTE alarm (Cross track error)
Turns on/off the XTE alarm.
Trails
Opens the Trails dialog where trails settings can be adjusted and
trails can be converted into routes for navigation.
Create route
1. Select a trail on the Trails dialog
2. Tap Create route
- When the route has been created, the Edit routes dialog
will appear.
3.
Tap Start
4. Tap the way you want to navigate the route (Forward or Reverse)
Logging Type
You can select to record trail points based on time, distance or
by letting the unit position a point automatically when a course
change is registered.
Phantom Loran
Estimates Loran TDs based on GPS position, the selected GRI and
preferred station.
Loran settings
Defines Loran chains (GRI) and preferred station for
waypoint entry and cursor position. The graphic
example shows cursor position window with Loran
position information.
For more information refer to your Loran system documentation.