Filter
Top Products
2
Contents Introduction
The Model AE2000Plus Telephone Entry & Access Control System
is designed for use as a primary access control device for gated
communities, parking garages, offi ce buildings, apartments, dormitories,
hotels/motels, commercial buildings and recreational facilities.
Housed in a locked, rugged stainless steel faced enclosure, the
AE2000Plus features a lighted keypad with bright, easy-to-read graphics,
a large backlit display with programmable welcome message, a built-in
microphone, speaker, and provision for an optional color CCTV camera.
The cabinet is monitored with a magnetic “tamper” switch.
The four relay output channels can be programmed to control electric
door strikes, magnetic locks, door & gate operators, or barrier gates.
The system utilizes hands-free, full duplex telephone communications
between visitors and residents for granting access. Complete access
control event logging, access time restriction, access location
restriction, and administration functions are also available to manage
the installation.
The AE2000Plus is network ready. Multiple units can be interconnected
on a 3-wire RS-485 network or through modems. The AE2000Plus can
be used in mixed networks with its sister products, the AE1000Plus and
AM3Plus.
Two Wiegand inputs are available for connection of 26, 30, or 31-bit
Wiegand devices (card readers, etc.). Three sets of PBUS inputs are
available for connection to Linear’s line of remote accessories.
Operation
In a typical installation, the unit’s memory would be programmed with
each resident’s name and directory code number. Arriving visitors
would use the keys on the AE2000Plus to view the directory names and
directory number for the desired resident. Upon selecting the directory
number, the AE2000Plus will automatically dial the resident’s telephone
number and establish two-way voice communication between the visitor
and the resident. The resident will then have the option to grant or deny
access to the visitor by pressing a digit on their telephone.
In addition to the telephone entry, the AE2000Plus can grant access
using entry codes at the local or remote keypads. Also remote receivers,
card readers, and interior and exterior keypads can be used with the
system.
Block coded MegaCode
®
transmitters can be used to gain access through
the AE2000Plus’s built-in or remote radio receivers. Each transmitter can
be individually suspended or re-activated.
The system’s clock/calendar can control access based on specifi c times
and dates. Automatic relay activation can be scheduled. Access can be
restricted to certain times and dates. Holiday access can be scheduled.
The system’s event log records system activity for future reference.
Programming and Cardholder Maintenance
Two programming methods can be used with the system: Linear’s
AXNET or AccessBase2000. Each has its advantages, but only one must
be chosen at the onset for each installation. Once a unit is programmed
with one method, all programming data will be lost if a decision is made
to switch to the other method.
Linear’s AXNET software is built into each unit. It allows connecting to the
unit using common browser software from any PC at any location. Each
unit’s database is stored in the unit’s memory.
Linear’s AccessBase2000 software installs in one dedicated PC and is
designed with many extra features usually for large network installations.
The database for the entire system is stored in the dedicated PC.
Introduction ........................................................................... 2
Operation ............................................................................... 2
Programming and Cardholder Maintenance ............................ 2
Hardware Features ................................................................ 3
Software Highlights ............................................................... 3
Feature Overview ................................................................... 3
Accessory Overview ............................................................... 4
PBUS Accessories .................................................................. 4
Wiegand Accessories ............................................................. 4
Component Locations ............................................................ 5
Wiring Diagram ...................................................................... 6
Important Mounting Requirements ......................................... 7
Entry System Mounting .......................................................... 8
Relay Output Wiring ..............................................................10
Power, Battery, & Ground Wiring ...........................................11
RS-232 Port ..........................................................................11
Telephone Wiring ..................................................................12
Optional Radio Antenna .........................................................12
Optional Postal Lock .............................................................13
Optional Color CCTV Camera ................................................13
PBUS Accessories .................................................................14
Wiegand Accessories ............................................................14
Optional Network Connections ..............................................15
System Adjustments .............................................................18
System Diagnostics ..............................................................18
Internal Controls ...................................................................19
AE2000Plus Operation ......................................................... 20
Specifi cations ...................................................................... 21
Dimension Drawing .............................................................. 21
Troubleshooting ................................................................... 22
Linear Limited Warranty ....................................................... 23
FCC Notice ........................................................................... 23
Throughout this manual, multiple-unit networks are referenced. Depending on
the programming method used, networks can contain the following model units:
NETWORK MODEL OPTIONS
With AccessBase2000 Programming With AXNET Programming
AM3Plus AM3Plus
AE1000Plus AE1000Plus
AE2000Plus AE2000Plus
AM-3
AE-1000
AE-2000