Filter
Top Products
Section 2: Installation
4. Click on the Configure button. Select the corresponding
baud rate as set on RCM8 DIP Switch 1-7; select 7 data bits;
Even parity; 1 stop bit; No flow control. Click on OK to
confirm entry and return to previous dialog box.
Liebert RCM8 • 13
5. Click on the Settings tab, and the ASCII Setup button.
Ensure the Send line ends with line feeds check box is
selected, and that the Echo typed characters locally check
box is de-selected. Click on OK to confirm entries and exit
from dialog box.
6. IMPORTANT: Save the connection information at this
time by going to File / Save As.
7. Once the communication parameters are set and saved,
connect with the RCM8 by selecting Call / Connect, or click
on the telephone icon in the menu bar.