KTM 990s Motorcycle User Manual


 
ENGLISH
43
TROUBLESHOOTING »
TROUBLE CAUSE REMEDY
FI lamp is blinking / lights up Error in the injection system Visit an authorized KTM workshop
Engine stalls while driving No fuel
Fuse for fuel pump has blown
Refuel
Replace fuse FUEL PUMP
High oil consumption Engine oil level too high
Engine oil too thin (viscosity)
Check engine oil level when the engine is warm; correct if
necessary
Use thicker engine oil; see chapter „Engine oil“
Headlight and position light fail Blown fuse Replace fuse H/L BEAM POSITION.
Flasher lights, brake light, horn
and multi-functional digital
speedometer fail
Blown fuse Replace fuse HORN BRAKELIGHT SPEEDO.
Time is not displayed or not
correctly displayed
Blown fuse, thus no continuous
power supply
Replace fuse CLOCK and set the clock.
The battery is discharged The ignition (power consumer) has-
n’t been switched off
The battery isn’t charged by the
generator
Recharge the battery according to the relevant instructions.
Voltage regulator and generator should be checked by an
authorized KTM workshop.
No values are visible in the
multi-functional digital
speedometer display.
Blown fuse Replace fuse HORN BRAKELIGHT SPEEDO.
The speed indication on the mul-
tifunctional digital speedometer
is not working
Pickup cable is damaged or contacts
on the cable connector have oxidized
Check the pickup cable for damage, visit an authorized KTM
workshop