Filter
Top Products
ENGLISH
10
OPERATION INSTRUMENTS »
Filler cap
The filler cap [1] can be locked. It is equipped with a tank ventilation system.
To open, insert the ignition key, turn 45° in a clockwise direction and tilt the
filler cap back.
After refueling, pull out the ignition key and press down on the filler cap until
the lock engages.
Seat lock, removing the seat
The seat lock [2] can be locked with the ignition key.
To remove the seat, insert the ignition key and turn 90° in a clockwise direc-
tion. Lift the seat in the back while pressing near the holding strap and pull
off towards the back.
To mount the seat, place it on the motorcycle and position the hooks [3] on
the bottom of the seat behind the dollies [4] on the subframe. Press down on
the seat near the holding strap while sliding it forwards. The two tabs [5] must
hook onto the tank. Turn the ignition key in the seat lock 90° in a counter-
clockwise direction and pull off. Check whether the seat is mounted correctly.
Baggage loops
4 loops [6] are mounted on the bottom of the seat to which small pieces of
baggage can be fastened. Fold the loops towards the outside to make them
accessible when the seat is mounted.
BAGGAGE WEIGHT: MAX. 5 KG
Tool set
The tool set [7] is located in the storage compartment under the seat.
1
2
3
4
5
6
6
7